Impact of Anti-Collision Technology on School Buses
Friday January 12, 2018
School bus transportation ensures the safety of school kids. Nevertheless, parents tend to have a certitude in the school transportation services, when compared to the private transportation services. By integrating technology to the school bus, you will be able to enhance the school bus safety of students.
Accidents cannot be avoided completely, but it can be prevented. As a consequence, the anti-collision technology can be such a technology that enables you to prevent the fatal accidents. Of course, drivers will be unable to control vehicle speed and avoid harsh braking in today’s rising traffic.
Merit of Anti-Collision Technology
With the assistance of the anti-collision technology, the vehicle will sense the hazard from a far-off distance, and stops the vehicle at the right time. Drivers are not required to apply the brake, as the anti-collision system will perform the job for you.
Highlights of Anti-collision Technology
- Extended range proximity sensors
The proximity sensors will have sensing range 3 times the standard sensors. As a result, the collision rate will be reduced by diverting your vehicle away from the crash zones. In case of cylindrical-type inductive sensors, the sensor range is from 0.8 to 15 mm. Hence, the exact separation between the target and the sensor should be lower than 12 mm.
As a matter of fact, when sensors are placed closer to the moving target, it will increase the destruction percentage caused by physical contact. A sensor that alters or vibrates from the original position will suffer increased damage due to collision. Hence, extended range sensors reduce the circumstance of damage.
- Infra-red sensors surrounding the vehicle
With the support of an infrared sensor, you will be able to recognize certain attributes of surroundings by either transmitting or identifying the infrared radiation. Moreover, the IR sensors enable you to measure the heat transmitted by an object and discover its motion. As a consequence, the IR sensors work by utilizing a specific light sensor, which enable you to realize the light wavelength in the IR spectrum. Along with an LED that generate light with the similar wavelength, you can realize the intensity of the received light.
Furthermore, IR sensors detect the obstacles that lie in front or side wise and alter its position depending upon the field.
Collision Mitigation System in School Transportation
Of course, school buses are designed for the safety of students. Hence, the driver confronts an immense risk and pressure as they are ferrying the precious cargo in the universe- the future generation. Collision mitigation systems can act as an insurance for ensuring the student safety. By installing the system, you will be able to evade the careless accidents and injuries. Exclaiming how? The system stops the vehicle without the assistance of drivers, if they sense danger ahead.
Can cost impede the installation of anti-collision technology on school buses?
Meanwhile, school transportation services will be allotted a limited amount of money. As a result, installing the anti-collision technology will be expensive for school authorities. According to the sources, the collision mitigation system cost ranges from $2100 to $6800, which varies according to the manufacturer and the level of technology.
One of the major anti-collision technology suppliers is Bendix, apart from that, Meritor WABCO is another key supplier of the system. However, its OnGuard systems have been utilized in around 180 commercial vehicles. In fact, with the implementation of technology, it is reported to have 75% to 87% reduction in collisions and 89% reduction in accident expenses.
As a matter of fact, installing the anti-collision technology in vehicles can be beneficial in every way, since it prevents the collisions caused by negligent motorists, who is unable to notice the enormous yellow bus.